Ethernet Over Coax Converter(EOC) POE IP Over Coax Extender , Max 3000ft Power and Data Transmission Over Regular RG59 Coaxial Cable

3D Model

x

PoE + Ethernet over Coax (EOC) Converter

PoE + Ethernet over Coaxial (EOC) Converter, Upgrade Analog to IP Surveillance System without Replacing Coaxial Cables - LINOVISION US Store

$ 1,655.64 MXN
In Stock

Free delivery . Delivery to

Choose your location x

Apply

Please enter a valid US zip code

Produc variants

-

+

PoE & IP OVER COAX CONVERTER - POE IP Over Coax converter can be used to upgrade analog system to IP surveillance system while using existing coaxial cable. Compatible with RG59, RG6, RG11 cables. Supports POE standards 802.3af (PoE) and 802.3at (PoE+).
POE & IP OVER TWIST PAIR CONVERTER - Each pair of EOC(Ethernet over Coax) Converter is equipped with 2 BNC to Twist Pair connectors, which enables POE over Twist Pair transmission. 100Mbps bandwidth over 100m regular twist pair cables while 10Mbps over 453m for both POE or NON-POE devices. It’s ideal for the CCTV system in elevator cart.
INDUSTRIAL DESIGN WITH BUILT-IN HEAT SINK - Industrial design, with built-in heat sink, ensure super reliability and hassle free transmission. Indoor use ONLY. Plug-and-play, configuration free, makes installation simplest. Small design and light weight.
POINT TO POINT CONNECTION ONLY - Act as MoCA (Multimedia over Coax) in point-to-point connection, transmit video/audio/data/control signal over coaxial cable, so as being used with twist pair. EOC Receiver should be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices.

Application

Used to upgrade analog system to IP surveillance system without replacing the existing coaxial cable.
Perfect for elevator application where there are no ethernet cables and no camera powers, it can transmit POE power and IP data over coaxial or twist pair cables.
Working with POE-Splitter1224, it can transmit POE power + data for non-POE DC12V or DC24V Devices. Supports PoE and POE+, but not POE++
Ethernet data extender up to 3,000ft over coax cable or twist pair cables (Bandwidth will be lowered to 10Mbps over 1,000ft).
Work with ePoE IP cameras which has built-in EOC-Transmitter (EOC-Receiver, EOC-Adapters are required)

Note: For multiple PoE over coax cables application in one system, it is highly recommended to use EOC-Switch KIT to avoid potential signal interference.

SKU: EOC-Converter (Receiver+Transmitter)

Datasheet Manual Video

SAME DAY SHIPPING (BEFORE 2PM CST)

30 DAY RETURNS

24/7 US LOCAL + GLOBAL TECH SUPPORT

Frequently bought with

PoE + Ethernet over Coax (EOC) Converter

$ 1,655.64 MXN

-

+

(POE-SW508G) Industrial 8 Ports Full Gigabit PoE Switch with 4 BT90W Ports, Total PoE Budget 120W

$ 1,862.62 MXN

-

+

5 Ports DC12-48V Input Full Gigabit POE Switch with Voltage Booster - LINOVISION US Store

(POE-Switch0504GD) 5 Ports DC9-54V Input Full Gigabit POE Switch with Voltage Booster

$ 1,966.11 MXN

-

+

Outdoor Enclosure & Universal Camera Mount for EOC-Transmitter or POE-Extender02 (EOC-Enclosure2)

$ 517.45 MXN

-

+

The bundle

This Item

x1

+

This item

PoE + Ethernet over Coax (EOC) Converter

$ 1,655.64 MXN

-

+

Frequently bought with

(POE-SW508G) Industrial 8 Ports Full Gigabit PoE Switch with 4 BT90W Ports, Total PoE Budget 120W

$ 1,862.62 MXN

-

+

(POE-Switch0504GD) 5 Ports DC9-54V Input Full Gigabit POE Switch with Voltage Booster

$ 1,966.11 MXN

-

+

Outdoor Enclosure & Universal Camera Mount for EOC-Transmitter or POE-Extender02 (EOC-Enclosure2)

$ 517.45 MXN

-

+

OverView Comparison Key Specification Q&A Resources Reviews

Linovision EOC-Converter is a combination of Power over Coax (PoC) and Ethernet over Coax (EOC) converter. With proprietary ePOE technology, it is designed to transmit both PoE power and ethernet data over coaxial cables or twisted pair cables, including siamese cable, CATV cable, power cable, Cat5E/Cat6, etc. The max transmission distance can be 3,300ft. It is super useful to upgrade the analog camera system to an IP surveillance system without replacing legacy coaxial cables. It can also be used in elevators to get power and network from coax or twisted pair cables.

Unique Features Compared with Competitors

Industrial design

Industrial design, with built-in heat sink Ensure super reliability and hassle-free transmission.

POE power + Data transmission

It can Provide power to remote POE device with max. 30W and no local DC power adapter is required. （Note: The POE OUT Port only support PoE Mode A）

Transmission Performance

Compatible to IEEE802.3af/IEEE802.3at POE protocol, max21W POE load capacity in 100m(330ft), or 11W POE load capacity in 300m(1000ft).

DIN-Rail Installation

DIN-Rail Installation. Plug-and-play, configuration free, makes installation simplest. Small design (3.1"x2.0"x0.9") and light weight.

General EOC Applications

Upgrade traditional analogue video surveillance system to IP surveillance system with existing coaxial cable at max 3,000ft distance.Up to100Mbps bandwidth over 1,000 feet regular coax cable transmission, working with CCA/CCU RG59/RG6 cable

There are some locations that are without network cables but still need POE power and data transmission, for example, elevator carts in many buildings, or doorbell cables, LINOVISION EOC converters are perfect for this application. It can transmit POE power and IP data over coax RG59 cable, twisted pair cable, doorbell cable, telephone cable, or even power cables. The remote-connected device can be IP cameras, IP Video intercoms, IP phones, IP controllers, etc.

1. Over twisted Pair Cable

2. Application for Non-POE

3. For POE VoIP Phone over coax / twist pair cables

4. POE power + Data transmission for non-POE DC12V Devices

5.Long Reach PoE up to 3,300ft

6. Power + Data bi-direction transmission to POE Wi-Fi AP (48V POE device only)

7.For ePoE IP camera over Coaxial Cable

8.For multiple PoE over Coax Cables application in one system

Application in Elevator

For many elevators there are no ethernet cables and no camera powers in the elevator cart, LINOVISION EOC converters are perfect for this application. It can transmit POE power and IP data over coaxial or twist pair cables. One passive EOC-transmitter will be put inside the elevator cart to feed the camera or signal board, and one EOC-receiver will be in the control room, powered by POE switch/POE injector/POE NVR. For multiple elevators application, one EOC-Switch08 or EOC-Switch24 will be put in the control room, working together with max 8 elevators.

Package includes

Comparison

Comparison between LINOVISION EOC and similar products


Model	EOC-Converter	MoCA Adapter	GCA-6000KITb	Ve***ty VHW-HWPS-B/C	A**S T8640
Transimit POE	✔	NO(ethernet only)	NO(ethernet only)	✔	✔
Transmission Distance	3000ft	300ft	2600ft	1000ft or 1600ft with power supply	1000ft
Without extra DC power	✔	/	/	Optional	✔
Price	$	$	$	$$$	$$$$

Use Tips

Use good quality IEEE802.3at 30W PoE switch to provide POE power to our EOC-Receiver, preferred with the DC53V input voltage, instead of regular 48V input voltage. Please also check the PoE budget of the PoE Switch, and make sure that the port individually can output 30W PoE power. (Most PoE Switches in the market do not support all ports at 30W POE output). Use point-to-point direct coaxial cable. The cable and connector quality will heavily affect the transmission distance. Please make sure to connect EOC-Receiver to the POE switch, and then connect the PoE cameras to the EOC-Transmitter side. The PoE output from the EOC-Transmitter is PoE mode A (use Pin 1,2,3, 6 for both data and power). If your PoE device is PoE mode B, please use our POE-Splitter or PoE-Extender02. The PoE output is standard IEEE802.3af/at PoE, and not compatible with 24V passive PoE devices.

Linovision EOC-Converter’s advantages over other products in the market.

Linovision EOC-Converter VS Motorola MoCA Adapter or StarTech EOC1110K
Linovision EOC-Converter can transmit both PoE power and ethernet data, while MoCA adapter does not support.

Linovision EOC-Converter VS Axis T8640 or Veracity Highwire Powerstar or DUALCOMM DECA-200
Quite similar, but Linovision EOC-Converter can transmit PoE and data up to 3,300ft distance, while others is 1,000ft.

Linovision EOC-Converter VS Altronix eBridge1PCRMT
Quite similar, but Linovision EOC-Converter can transmit PoE and data up to 3,300ft distance, while Altronix eBridge is 1,640ft.

Linovision EOC-Converter VS Enconn Mini-Power
Quite similar, but Linovision EOC-Converter can transmit PoE and data up to 3,300ft distance, while Enconn is only 800ft.

Key Specification

Model	EOC-Converter (Receiver+Transmitter)
Function Port	110/100 Mbps Base-TX 1BNC
Power Consumption	<2W
Transmission Bandwidth	RG59 coaxial cable: 400m/100Mbps, 1000m/10Mbps
PoE Protocol (EOC-Receiver)	work as a PoE Powered device, compliant to IEEE802.3af/at. Auto adaptive to PoE mode A and B from PSU (PoE Switch or PoE NVR, strongly recommend to use 30W PoE+ port)
PoE Protocol (EOC-Transmitter)	work as a PSU, provide PoE power to standard IEEE802.3af/at PoE device (48V Passive PoE, Pairs 1, 2+; 3, 6 Return)
Network Standard	IEEE802.3, IEEE802.3u, IEEE802.3x
Lightning Protection	Common Mode 4KV Differential Mode 2KV
Operating Temperature	–30°C to 65°C (–22°F to 149 °F )
Operating Humidity	5%–95%
Dimension (each) WxDxH	79mm×52mmx23mm (3.1" x 2.0" x 0.9")
Weight (each)	61g (0.134lbs)

Q&A

Q.What kind of cables can be connected between EOC transmitter and EOC receiver?

A.

It can transmitter ethernet data and POE power over coaxial cables, twist pair cables, power cables, video cables or almost any two-pin cables.

Q.Can multiple devices be connected via single coaxial cable?

A.

Yes, one pair of EOC converter can be used to transmit multiple device over single coaxial cable with NVR/POE switch/WI-FI AP. The connection will be multiple device -> NVR/POE switch/WI-FI AP -> EOC Transmitter -> Coaxial cable ->EOC Receiver -> POE NVR/POE Switch/POE Injector with internet. Please note that the EOC receiver has to be connected to an POE NVR or POE Switch to be powered.

Q.Will this work for extending connectivity between a router and an Ethernet switch? Or extending WIFI?

A.

Yes. But you need a POE injector in EOC receiver side to provide power to EOC receiver and EOC transmitter. It is recommended to use 56V 30W POE injector.

Q.What’s the maximum load capacity of this EOC Converter?

A.

The maximum load capacity is 21W in 300ft transmission which is sufficient to power a regular IP PTZ camera. The load capacity can be at least 11W in 1000ft transmission which is sufficient to power most of IP cameras.

Q.What’s the maximum transmission distance of this EOC Converter?

A.

The maximum transmission distance is 3000ft. Please note that the load capacity will drop down to 4W with general DC48V injector, so it’s recommended to use 60W or 75W poe injector in the receiver side.

Q.What kind of device it can be working with?

A.

It can work with POE devices like IP cameras, POE Wi-Fi AP, VoIP phones, etc. And it can also work with non-POE device like PC/NVR, etc. And you still need a power injector to power the EOC receiver side even though don’t need poe.

Q.What POE standards does this support?

A.

It supports IEEE802.3af and IEEE802.3at standard. It can work with most of the IP cameras and mini PTZs in the market, we also have customers use this to power POE WIFI AP and it is working well.

Q.How can I mount them?

A.

It supports DIN Rail installation(Standard 35mm din rail), or you can put it inside a regular camera’s junction box, since it is very small in dimension, that is 3.1” x 2.0” x 0.9”

Q.Why my POE device is offline when working with our EOC (IP Over Coax) Converter?

A.

Several main reasons are as follow: 1. EOC transmitter has to be connected to POE device (IPC/VoIP), and EOC receiver is connected to POE supply device (POE NVR, POESwitch or POE Injector). The reverse connection will not work. 2. It is used for point-to-point coax cable direct connection only, no BNC repeater/T-connect/splitter in the middle. 3. It may be caused by insufficient load capacity. The maximum load capacity is 21W in 300ft transmission which is sufficient to power a regular IP PTZ camera. The load capacity can be at least 11W in 1000ft transmission which is sufficient to power most of IP cameras or VoIP phones. 4. No power supply will also make it fail to work. Please be informed that EOC receiver has to be connected to an POE NVR, POE Switch or POE Injector to be powered.

Resources

Datasheet(1)

User Manual(1)

TroubleshootingGuide(1)

Video(1)

EOC-Converter Datasheet

EOC-Converter User Manual

Troubleshooting Guide

Product Review Video

Handy dandy little problem solver

Saved me from running cat5 through buried conduit, along with exceeding ethernet distance limitations.
Works well with a cheap TP-Link Tapo C320WS and 5v PoE Splitter. Time will tell how long it lasts in a outdoors waterproof box. No issues streaming continuously over a week at 2K 15fps quality.

Great product

This little device right here is great simple plug-and-play works like a charm, very compact, and I love that they’ve incorporated rackmount clips

Life saver

I have replaced 48 cameras and change them to POE. 6 of them were impossible to replace cables, because they are under ground, that is why I had to use this device to use POE camera. I wasn't sure at the first time, because to good to be true. At first I installed three of them about one month ago, and they where working fine, with good 4K quality. I realized the two of them randomly turning off, but one of them always turned off. with lot of troubleshooting, I found out that specific one had a bad BNC connection. I changed the BNC head, now they working perfectly. Remember to make a good BNC head, otherwise you will have problem on all of them, if they are in the same network. Anyway I bought 3 more, and installed them outside into LINOVISION EOC Converter Waterproof Box. They are working fine for now, lets see if in raining days or in the hot summer will be good too. cross our fingers. the quality of unit by itself is very good, well made.

They work great.

We have these on 7 of our IP cameras, they work great. No problems at all.

Ethernet of coaxial

I’m coming up on about one year and I used these for a brand new IP camera installation with 30 total cameras using all old 20-year-old BNC cabling.
So far so good and these things saved an enormous amount of time, and not to mention I was able to get the job only because I said my company would use the existing old BNC cable in the building and not need to tear into the walls and run new Cat6 cabling for all 30 cameras.
There’s just not much history to go by with these devices so when I say they’ve been running for almost a year, I don’t know that there is any other commenters on here that have used them for longer than one year.
If I got five years out of them, I would be thrilled. That being said my company did save about $7000-$10,000 not having to pay for low-voltage installers to run each cable.

1 2 3

PoE + Ethernet over Coax (EOC) Converter

EOC Switch + 6 EOC Transmitter Kit

EOC Switch + 8 EOC Transmitter Kit

EOC Switch + 4 EOC Transmitter Kit

PoE + Ethernet over Coax (EOC) Converter (5 Pack)

PoE + Ethernet over Coax (EOC) Converter (10 Pack)

Unique Features Compared with Competitors

Industrial design

POE power + Data transmission

Transmission Performance

DIN-Rail Installation