LINOVISION POE Over Coax EOC Converter Ethernet (IP) Over Coax, Max 3000ft Power and Data Transmission Over Regular RG59 Coaxial Cable (5 Pack)
Sale!
2 reviews
from$541.90 CAD /perIn Stock
【CONVERTISSEUR PoE & IP SUR COAX】Le convertisseur POE IP sur coaxial de LINOVISION peut être utilisé pour mettre à niveau le système analogique vers le système de surveillance IP tout en utilisant un câble coaxial existant. Compatible avec les câbles RG59, RG6. Prend en charge les normes POE 802.3af (PoE) et 802.3at (PoE+). Le récepteur EOC doit être alimenté par un commutateur POE ou un injecteur POE tandis que l'émetteur doit être connecté à des appareils POE ou à des appareils NON-POE
【TRANSMISSION POE LONGUE PORTÉE】 Jusqu'à 100 Mbps en transmission par câble RG59 de 300 m (1000 pieds), distance maximale de 1000 m (3000 pieds) en 10 Mbps, fonctionnant avec un câble CCA/CCU RG59/RG6. Prise en charge de la transmission de puissance POE avec une capacité de charge de 11 W sur une transmission de 300 m (1000 pieds), fonctionnant avec une caméra IP POE, un téléphone VoIP, un point d'accès WiFi POE
【DESIGN INDUSTRIEL AVEC DISSIPATEUR DE CHALEUR INTÉGRÉ】 Le design industriel, avec dissipateur de chaleur intégré, assure une super fiabilité et une transmission sans tracas. Utilisation en intérieur UNIQUEMENT. Plug-and-play, sans configuration, rend l'installation plus simple. Petit design (3.1"x2.0"x0.9") et poids léger
【CONNEXION POINT À POINT UNIQUEMENT】 Agit comme MoCA (multimédia sur coaxial) dans une connexion point à point, transmet le signal vidéo/audio/données/contrôle sur un câble coaxial, de manière à être utilisé avec une paire torsadée. Le récepteur EOC doit être alimenté par un commutateur POE ou un injecteur POE tandis que l'émetteur doit être connecté à des appareils POE ou à des appareils NON-POE
【ASSISTANCE TECHNIQUE 24/7 US LOCAL + GLOBAL】Ce produit est livré avec une garantie d'un an, 24/7 US LOCAL + GLOBAL Tech Support à vie. Service de consultant système gratuit. N'hésitez pas à nous contacter ici. Prêt et disposé à aider à tout moment
En raison de l'atténuation du signal, de la qualité du câble, de l'inadéquation du mode PoE A/B ou du budget PoE insuffisant des unités d'alimentation PoE (très courant dans les NVR PoE), notre récepteur EOC et notre émetteur EOC peuvent ne pas être allumés. Dans cette situation, nous vous recommandons fortement d'utiliser notrePoE-Extender02 , qui agit comme un booster PoE et un convertisseur A/B en mode PoE. Ou vous pouvez utiliser notre haute qualitéCommutateur PoE1008DINpour assurer une grande stabilité dans un environnement difficile.
This item is currently on backorder but you can still purchase it now and we'll ship as soon as more become available.
Linovision EOC-Converter is a combination of Power over Coax (PoC) and Ethernet over Coax (EOC) converter. With proprietary ePOE technology, it is designed to transmit both PoE power and ethernet data over coaxial cables or twisted pair cables, including siamese cable, CATV cable, power cable, Cat5E/Cat6, etc. The max transmission distance can be 3,300ft. It is super useful to upgrade the analog camera system to an IP surveillance system without replacing legacy coaxial cables. It can also be used in elevators to get power and network from coax or twisted pair cables.
3 Main Reasons to Use Linovision POE IP Over Coax Converters
Reason 1
Upgrade traditional analog camera system to IP surveillance system without replacing existing coaxial cable (RG59 cable)
Reason 2 Long Reach PoE up to 3,300ft
There are some situations in that users need to transmit PoE power and data over ultra-long distances, for example, power a remote security camera from 500 meters (or 1,640ft) away (from one building to another building), or supply power to a PoE IoT device from one side to another side of an underwater tube. The regular PoE extender will extend 100 meters only. Linovision innovative EOC solution, it makes possible to transmit PoE power and data over max. 1,000 meters (or 3,300ft) through regular Cat5e or Cat6 cable, this will reduce thousands of dollars in cabling cost.
Reason 3 POE +Data Transmission over Twisted pair cable, coax cable, telephone cable, doorbell camera, or any two-pin cables
There are some locations that are without network cables but still need POE power and data transmission, for example, elevator carts in many buildings, or doorbell cables, LINOVISION EOC converters are perfect for this application. It can transmit POE power and IP data over coax RG59 cable, twisted pair cable, doorbell cable, telephone cable, or even power cables. The remote-connected device can be IP cameras, IP Video intercoms, IP phones, IP controllers, etc.
Unique Features compared with other products in the market
POE + IP Data transmission over Coaxial cable, perfect for IP CCTV system.
Industrial design, with built-in heat sink, ensure super reliability and hassle-free transmission.
Up to 100Mbps in 300m (1000ft) RG59 cable transmission, max 1000m (3000ft) distance in 10Mbps.
EOC Transmission Performance
This chart of transmission performance is based on regular RG59 coaxial cable and powered by standard DC48V POE injectors.
The performance will be better when using RG6 cable or DC53V POE injectors.
This EOC transmitter and receiver can transmit up to 100Mbps network data and load max 11W POE device in 300 meters (or 1,000ft).
The network bandwidth will be automatically lowered to 10Mbs over 1,000ft and the max transmission distance is 3,280ft. This bandwidth is still sufficient for single 4K IP camera.
Applications
1. Upgrade traditional analogue system to IP surveillance system while using existing coaxial cable(RG59 cable)
2. Power + Data transmission to POE VoIP Phone over coax / twist pair cables
3. Power + Data bi-direction transmission to POE Wi-Fi AP (48V POE device only)
4. Ethernet data extender up to 1,000 meters (3,300 ft) over coax cable or twist pair cables (Bandwidth will be lowered to 10Mbps over 300 meters)
5. POE power + Data transmission over twist pair cables (connector is included in package)
6. POE power + Data transmission for non-POE DC12V Devices
7.For ePoE IP camera over Coaxial Cable
8.For multiple PoE over Coax Cables application in one system
9. For many elevators there are no ethernet cables and no camera powers in the elevator cart, LINOVISION EOC converters are perfect for this application. It can transmit POE power and IP data over coaxial or twist pair cables. One passive EOC-transmitter will be put inside the elevator cart to feed the camera or signal board, and one EOC-receiver will be in the control room, powered by POE switch/POE injector/POE NVR. For multiple elevators application, one EOC-Switch08 or EOC-Switch24 will be put in the control room, working together with max 8 elevators.
Package includes:
5 * EOC Transmitter
5 * EOC Receiver
5 * User Manual
10 * Pack of installation screws
10 * BNC to Twist Pair Connector
Comparison between LINOVISION EOC and similar products
Key Specification
Model
EOC-Converter (Receiver+Transmitter)
Function Port
1*10/100 Mbps Base-TX 1*BNC
Power Consumption
<2W
Transmission Bandwidth
RG59 coaxial cable: 400m/100Mbps, 1000m/10Mbps
PoE Protocol (EOC-Receiver)
work as a PoE Powered device, compliant to IEEE802.3af/at. Auto adaptive to PoE mode A and B from PSU (PoE Switch or PoE NVR, strongly recommend to use 30W PoE+ port)
PoE Protocol (EOC-Transmitter)
work as a PSU, provide PoE power to standard IEEE802.3af/at PoE device (48V Passive PoE, Pairs 1, 2+; 3, 6 Return)
Network Standard
IEEE802.3, IEEE802.3u, IEEE802.3x
Lightning Protection
Common Mode 4KV Differential Mode 2KV
Operating Temperature
–30°C to 65°C (–22°F to 149 °F )
Operating Humidity
5%–95%
Dimension (each) WxDxH
79mm×52mmx23mm (3.1" x 2.0" x 0.9")
Weight (each)
61g (0.134lbs)
Q&A
Q.What kind of cables can be connected between EOC transmitter and EOC receiver?
A.
It can transmitter ethernet data and POE power over coaxial cables, twist pair cables, power cables, video cables or almost any two-pin cables.
Q.Can multiple devices be connected via single coaxial cable?
A.
Yes, one pair of EOC converter can be used to transmit multiple device over single coaxial cable with NVR/POE switch/WI-FI AP. The connection will be multiple device -> NVR/POE switch/WI-FI AP -> EOC Transmitter -> Coaxial cable ->EOC Receiver -> POE NVR/POE Switch/POE Injector with internet. Please note that the EOC receiver has to be connected to an POE NVR or POE Switch to be powered.
Q.Will this work for extending connectivity between a router and an Ethernet switch? Or extending WIFI?
A.
Yes. But you need a POE injector in EOC receiver side to provide power to EOC receiver and EOC transmitter. It is recommended to use 56V 30W POE injector.
Q.What’s the maximum load capacity of this EOC Converter?
A.
The maximum load capacity is 21W in 300ft transmission which is sufficient to power a regular IP PTZ camera. The load capacity can be at least 11W in 1000ft transmission which is sufficient to power most of IP cameras.
Q.What’s the maximum transmission distance of this EOC Converter?
A.
The maximum transmission distance is 3000ft. Please note that the load capacity will drop down to 4W with general DC48V injector, so it’s recommended to use 60W or 75W poe injector in the receiver side.
Q.What kind of device it can be working with?
A.
It can work with POE devices like IP cameras, POE Wi-Fi AP, VoIP phones, etc. And it can also work with non-POE device like PC/NVR, etc. And you still need a power injector to power the EOC receiver side even though don’t need poe.
Q.What POE standards does this support?
A.
It supports IEEE802.3af and IEEE802.3at standard. It can work with most of the IP cameras and mini PTZs in the market, we also have customers use this to power POE WIFI AP and it is working well.
Q.How can I mount them?
A.
It supports DIN Rail installation(Standard 35mm din rail), or you can put it inside a regular camera’s junction box, since it is very small in dimension, that is 3.1” x 2.0” x 0.9”
Q.Why my POE device is offline when working with our EOC (IP Over Coax) Converter?
A.
Several main reasons are as follow: 1. EOC transmitter has to be connected to POE device (IPC/VoIP), and EOC receiver is connected to POE supply device (POE NVR, POESwitch or POE Injector). The reverse connection will not work. 2. It is used for point-to-point coax cable direct connection only, no BNC repeater/T-connect/splitter in the middle. 3. It may be caused by insufficient load capacity. The maximum load capacity is 21W in 300ft transmission which is sufficient to power a regular IP PTZ camera. The load capacity can be at least 11W in 1000ft transmission which is sufficient to power most of IP cameras or VoIP phones. 4. No power supply will also make it fail to work. Please be informed that EOC receiver has to be connected to an POE NVR, POE Switch or POE Injector to be powered.
The product works as advertised. Used these items in 3 elevators, with IP cameras. So far the video in these elevators has a great video. Its been working great for several weeks now with no problems.
s
sarah marcum
Work great!
I ordered FIVE sets of 2 converters (5 kits total) and only received the transmitters. I’ve ordered these before as single kits and they came with everything work great. I’ll change my review after the seller contacts me. Update: they sent me the receivers in a very timely manor. Will purchase again!
Introduction au convertisseur EOC (3,3 Mo)
