| Model | POE-Switch1008-Solar |
|---|---|
| Technical Specification | |
| Downlink Ports | 8*10/100/1000Base-T (PoE) |
| Uplink Ports | 2*1000 Base-X SFP Slots |
| Standard and Protocols | IEEE802.3 , IEEE802.3u, IEEE802.3ab, IEEE802.3Z, IEEE802.3X, IEEE 802.1D,IEEE802.1af/at |
| Switching Capacity | 20Gbps |
| Packet Forwarding Rate | 14.9Mpps |
| Buffer | 2Mbit |
| MAC Address Table | 16K |
| Jumbo Frame | 10K bytes |
| PoE Line Pair | 1/2(+)，3/6(-) |
| PoE Output Power | Output PoE power for singe port≤30W, output PoE power is 80W(12V), 120W(24V), 240W(48V) |
| Input Terminal | 4 PIN / 5.08mm |
| Power Input | DC 9.5-57V |
| Power Mode | Mode A |
| Power Consumption | ≤12W (Not inlcude PoE) |
| Material | Aluminium alloy, IP40 |
| Dimension（L×W×H） | 6.24"x4.3"x1.8" (159×110×46.5mm) |
| Weight | 1.874lb (942g) |
LINOVISION DC12V POE Switch Selection Guide
Learn more >
|
|
Learn more >
|
|
|---|---|---|---|
| Model | POE-Switch0504GD | POE-Switch1008-Solar | POE-SW708GM-DC12V |
| Input | Dual DC Input: 9V~54V DC |
Dual DC Input: 9.5V~57V DC |
Dual DC Input: 12V~57V DC |
| Output | 48V POE Standard | 48V POE Standard | 48V POE; 12/24V DC Output |
| Uplink Ports | 1 Gigabit Ethernet Uplink | 2 Gigabit SFP | 2 Gigabit SFP |
| POE Ports | 4 Gigabit PoE Ports | 8 Gigabit PoE Ports | 8 Gigabit PoE Ports |
| POE++ Ports | / | / | 1 * BT 90W Port |
| POE budget | 120W (DC24V/48V), 60W (DC12V) |
240W (DC48V), 120W (DC24V ) |
240W (DC48V), 120W (DC24V ) |
| L2/L3 Management | / | / | VLAN, QoS, SNMP, Fast-Ring |
| PoE Port Control | / | / | Turn On/Off PoE |
| Installation Method | DIN-Rail/Wall-Mount | DIN-Rail/Wall-Mount | DIN-Rail/Wall-Mount |
| Waterproof | ✘ | ✘ | ✘ |
Compared to a regular industrial PoE switch, this solar PoE switch has a built-in DC12V to DC48V voltage booster so it can be powered by any power source between DC12V and DC48V, for example, DC12V from solar power system, DC12V from vehicle battery, DC24V from commercial buildings, etc.
It provides PoE power to all of the standard IEEE802.3af/at PoE devices, like IP security cameras, VoIP phones, PoE wireless AP, etc.
No power adapter is included. You can use it with a regular DC12V or DC24V power adapter, or industrial DC12V power supply unit.
Yes, sure, that is what this PoE device designed for.
This PoE switch can be powered by two channels of DC power inputs. If there is one power input fails, another power input will ensure non-stop operation of this PoE switch.
If the PoE switch is not connected to a device, the current is 1.25A. If devices are connected, the maximum current depends on the power consumption of the connected devices, with a maximum of 7.5A.
nsert positive 1 and 2, and negative 3 and 6.
Yes, sure. Each PoE port supports PoE automatic detection. When connecting to a non-POE device, it provide data transmission only, and will not output power to prevent burn or damage.
No, the POE Switch supports standard IEEE802.3af/at 48V POE Power. It does not support 24V Passive POE. Please contact us to get POE 48V to PoE 24V adapter.
This switch is great if you want to keep your PoE IP cameras and/or Mesh WiFi network working for several hours during power outages without bulky, expensive, inefficient or difficult to place AC UPS.
I am powering this switch with two series DIN-Rail mounted Meanwell DRC-100A 12Vdc UPS modules with one 18Ah battery each. This UPS runs for several hours, keeping my surveillance cameras and (TP-link Omada) Mesh WiFi working during power outages.
Mains power on our farm is quite unstable and prone to outages while cell phone coverage is just as bad, which is why keeping a working communications and surveillance system is so critical.
I used two 12V batteries in series as I'm using it to power 6 cameras with a 13Watt/camera requirement when IR lights are on at night time plus a WiFi AP, so the 80W@12Vdc limit would not have been enough. I used two 12V UPS modules instead of one 24V module to keep batteries balanced without risking battery overcharge or the need of a balancing circuit.
I love that it is DIN-Rail mountable like the Meanwell UPS modules, keeping the electrical box orderly and will make module replacement a breeze.
I have already bought the 4-port versions and more Meanwell modules to keep remote PtP AP nodes powered as to maintain connectivity during power outages in our farm.
Der Switch wird im Außenbereich (in einem Stromverteilerkasten) eingesetzt um Überwachungskameras und Access-Points mit Strom und Netzwerk zu versorgen.
Die Anbindung an das Netzwerk erfolgt per redundanter Glasfaser.
Ich nutze aktuell nur einen der beiden verfügbaren Stromeingänge mit einem Honeywell Netzteil.
Bis jetzt hat er auch höhere Temperaturen ohne Probleme überstanden.
We went with this for the option to add POE cameras to an industrial machine. I'm not sure about the person who left a review claiming an issue with it not working for their AB equipment??? Perhaps it's an AB issue or some other problem the user had with his/her setup? We have one of the network ports of a Beckhoff Industrial PC connected to this switch and it works fine. I've also connected a Rexroth servo drive directly to the switch with no issues.
If using this switch in an industrial setting, such as in an automation application, I recommend the switch be powered via it's own dedicated/isolated 48V PSU. We had one powered by the same PSU as a 48VDC servo motor, and it ended up damaging the switch during deceleration of the servo motor.
You can use a SFP Ethernet adapter! This is a very solid device. The review about automation of 1 STAR is their fault. NOT LINOVISION! This is why you call or ask questions. Never assume! They have managed versions too. Goto their very infomative site. Only recommendation to LINO V is to have a delineation line between products on the website. OUTSTANDING COMPANY! If using for POE Cameras. Be sure to total the power needed based on 12v/24v/48v to be sure you have enough. Very versatile!
I purchased direct and just found out they sell in Amazon. I could get faster via Prime so Im thrilled!!
One of the most supportive companies that I work with for CCTV, Solar, mobile applications.
This is my first using this 12V POW switch we are using for IPCameras and a solar panel to run 4 IPCameras this saves you from using a inverter to power a 110v switch. I will definitely use again for sure it also can be used in a RV or anyplace you don’t have 110v and can get 12VDC.
Fiche de données
