LINOVISION US Store
LINOVISION Industrial 8-Port Full Gigabit Solar POE Switch with DC12V/DC24V to DC48V Voltage Booster, IEEE802.3at with Total POE Budget 240W, POE Power Supply for Solar Power/RV Truck/VoIP Systems
| Technical Specification | |
|---|---|
| Downlink Ports | 8*10/100/1000Base-T (PoE) |
| Uplink Ports | 2*1000 Base-X SFP Slots |
| Standard and Protocols | IEEE802.3 , IEEE802.3u, IEEE802.3ab, IEEE802.3Z, IEEE802.3X, IEEE 802.1D, IEEE 802.1af/at |
| Switching Capacity | 20Gbps |
| Packet Forwarding Rate | 14.9Mpps |
| Buffer | 2Mbit |
| MAC Address Table | 16K |
| Jumbo Frame | 10K bytes |
| PoE Line Pair | 1/2(+)，3/6(-) |
| PoE Output Power | Output PoE power for singe port≤30W, output PoE power is 80W(12V), 120W(24V), 240W(48V) |
| Input Terminal | 4 PIN / 5.08mm |
| Power Input | DC 12-48V |
| Power Consumption | ≤12W (Not inlcude PoE) |
| Material | Aluminium alloy, IP40 |
| Dimension（L×W×H） | 159mm×110mm×46.5mm |
| Weight | 942g |
Compared to a regular industrial PoE switch, this solar PoE switch has a built-in DC12V to DC48V voltage booster so it can be powered by any power source between DC12V and DC48V, for example, DC12V from solar power system, DC12V from vehicle battery, DC24V from commercial buildings, etc.
It provides PoE power to all of the standard IEEE802.3af/at PoE devices, like IP security cameras, VoIP phones, PoE wireless AP, etc.
No power adapter is included. You can use it with a regular DC12V or DC24V power adapter, or industrial DC12V power supply unit.
Yes, sure, that is what this PoE device designed for.
This PoE switch can be powered by two channels of DC power inputs. If there is one power input fails, another power input will ensure non-stop operation of this PoE switch.
If the PoE switch is not connected to a device, the current is 1.25A. If devices are connected, the maximum current depends on the power consumption of the connected devices, with a maximum of 7.5A.
nsert positive 1 and 2, and negative 3 and 6.
Yes, sure. Each PoE port supports PoE automatic detection. When connecting to a non-POE device, it provide data transmission only, and will not output power to prevent burn or damage.
No, the POE Switch supports standard IEEE802.3af/at 48V POE Power. It does not support 24V Passive POE. Please contact us to get POE 48V to PoE 24V adapter.
