Each port is auto adaptive to PoE mode or EoC mode. For example, you can use 4 ports at EoC mode and another 4 ports at PoE modes.
Support 2 channel DC48V-57V redundant power inputs.
Two orange ports (Port 1,5) support POE++ 60W output
Industrial wide temperature design from -22 °F to +149 °F
It provides much-simplified cabling if you use multiple EOC converters in a site. When upgrading the analog system to an IP surveillance system, you can choose this EOC-Switch08 + EOC-Transmitters kit to reuse legacy coaxial cables, and you can add a few extra IP cameras with UTP (Cat5E/Cat6) cables. This will be a very simple and flexible solution for you.
| Model | EOC-Switch08 |
|---|---|
| Ethernet Port | 1*1000 Base-X 1*10/100/1000 Base-T 8*10/100 Base-T(PoE power supply) |
| PoE Power Consumption | Port1,5≤60W, Port2,3,4,6,7,8≤30W, Total≤120W |
| PoE Protocol | IEEE802.3af, IEEE802.3at, Hi-PoE |
| Switching Capacity | 8.8Gbps |
| Packet Forwarding Rate | 4.17Mpps |
| Packet Buffer Memory | 2.75Mb |
| MAC Table Size | 8K |
| Flow Control | Enable by default |
| Application Humidity | 10%~90% |
| Power | DC48~57V power adapter |
| Lightning Protection | Common Mode 4KV Differential Mode 2KV |
| Working Temperature | -22°F~149°F(-30°C~65°C) |
| Weight | 0.59kg |
| Dimension(W×D×H) | 150mm×100mm×42mm |
The whole connection should be (dahua epoe NVR/switch--eoc adapter--coaxial cable--eoc adapter--dahua epoe camera) or (dahua epoe NVR/switch--eoc adapter--coaxial cable--eoc transmitter--ordinary poe camera).
Please note that the EOC transmitter can indeed be used with the POE-Extender 02. This setup would allow you to connect two PoE cameras over a single coaxial cable, provided that the combined power consumption of both cameras stays within the wattage limit.
For your reference, here are some details on coax cable length and bandwidth for the EOC system.
Fiche de données
