使用 Linovision 两端口 PoE 扩展器的三大优势：
| Model | POE-Extender02 |
|---|---|
| Ethernet Port | 1*10/100 Base-T PoE power receiving port 1*10/100 Base-T PoE power supply port, supply power for the next extender 1*10/100 Base-T PoE power supply port, supply power for IPC |
| Transmission Distance | Cooperate with POE-Injector60W, able to cascade level two extender, connect to 3 IPC (level one extender connects to 1 IPC, the OUT port of level two extender and CAMERA port connect to 1 IPC respectively, total power consumption <=25W), transmission distance is 300m |
| PoE Input/Output Mode | Mode A, Mode B |
| PoE Input/Output Line Pair | 1/2/4/5: + 3/6/7/8: - |
| Power Consumption | <=3W |
| Application Humidity | 10%~90% |
| Working Temperature | -22°F~149°F(﹣30°C~65°C) |
| Weight | 57g(0.126lbs) |
| Dimension(W×D×H) | 79mm×52mm×23mm(3.1'' * 2.0'' * 0.9'') |
LINOVISION PoE Extender Selection Guide
Learn more >
|
Learn more >
|
Learn more >
|
|
Learn more >
|
Learn more >
|
|
|---|---|---|---|---|---|---|
| Model | POE-EXT3001GP | POE-EXT3001LP(2 Pack) | POE-EXT6002GP | POE-Extender02 | POE-EXT04 | POE-EXT9004G |
| PoE Input | Max 30W | Max 30W | Max 90W | Max 30W | Max 60W | Max 90W |
| PoE Output | 1 x 30W | 1 x 30W | 1 x 60W + 1 x 30W | 1 x 16W + 1 x 8W | 4 x 30W | 4 x 90W |
| PoE Standard | IEEE802.3af/at | IEEE802.3af/at | IEEE802.3af/at/bt | IEEE802.3af/at | IEEE802.3af/at | IEEE802.3af/at/bt |
| PoE Budget | 30W | 30W | 90W | 30W | 56W | 75W |
| Extend Extra Transmission Distance | Max.1000ft (2 pack) |
Max.2930ft (2 pack) |
Max.330ft (1 pack) |
Max.660ft (2 pack) |
Max.330ft (1 pack) |
Max.820ft (1 pack) |
| Ethernet Speed | Gigabit | 10/100Mbps | Gigabit | 10/100Mbps | Gigabit | 10/100/1000Mbps |
| Waterproof | ✔ | ✔ | ✔ | / | / | / |
| Installation Method | / | / | Wall-Mount | DIN-Rail/Wall-Mount | / | DIN-Rail/Wall-Mount |
是的，可以用于2台电脑，输入端口最大速度为100M。请注意，两个输出端口的总速度不能超过输入端口的速度。并且速度会受到传输距离的影响，距离越远，提供的速度越慢。
此 POE 延长器不防水。我们有2个防水版本，一种是带防水壳的同一产品， POE-Extender02WP 。
另外就是产品本身具有防水设计， POE-Extender02GP(90W) 。
是的，这里的“被动”意味着您不需要额外的电源来单独为该产品供电，但整个系统需要供电。该产品可以与 POE 设备（如 POE 扩展器/分离器）和非 POE 设备（如以太网分离器/扩展器）配合使用。请注意，该产品的每个端口最大支持 100Mbps。
此 POE 分离器不能与 24V POE 注入器一起使用。建议使用48-53V的POE供电器。并且请确保两个POE输出的总功耗小于POE输入功率（扣除POE延长器本身的3W功耗）。
本产品的工作温度为 -30°C 至 65°C（-22 °F 至 149 °F）。
不，它不需要本地电源。该 POE 延长器由 PoE 设备（48V 或 53V PoE 交换机/PoE NVR/PoE Injector/中跨）供电。它运作良好。
是的，POE延长器支持级联部署，最大传输距离为300m（1000ft），一根电缆可支持3个IP设备，但需要60W POE注入器，并且IP摄像机功耗应小于8W。
基本上，负载能力取决于POE供电设备，两个POE输出的总功耗小于POE输入的功率。例如，如果POE供电单元是30W POE注入器，则该POE延长器的总输出功率小于27W（扣除POE延长器本身的3W功耗），传输距离越远，功率输出越低来自 POE 延长器。我们建议使用 60W 高 POE 注入器连接到此 POE 延长器。
Please note that the EOC transmitter can indeed be used with the POE-Extender 02. This setup would allow you to connect two PoE cameras over a single coaxial cable, provided that the combined power consumption of both cameras stays within the wattage limit. For your reference, here are some details on coax cable length and bandwidth for the EOC system.
Please confirm both the POE injector and the POE PD device uses 802.3AF/AT. If that is the case, you should be able to use POE-Extender02 and add a PC in the middle.
Please let me know the model number for the injector and the POE device if you are not sure.
